Option Switches; The Sl 955J Motion Control Panel; Blank Panel - Solid State Logic SL 9000 J Series Operator's Manual

The Centre Section

Option Switches

A variety of functions may be provided by the ten user option switches at the top left
of the SL953 panel. Depending on the console specification, these can include:
SMALL FADER TO MONITOR – For 8-channel bays or groups of bays. This
function forces channels in the designated bays to Small Fader to Monitor mode when
the console is in Record status. This is useful when tracking, allowing the Large Faders
on Modules 1-24, for example, to act as Monitor faders and the Large Faders on
selected bays to act as Channel faders (see Section 2 for more on this).
SOLO ISOLATE – Isolates a designated 8-channel bay, or bays, from the Large and
Small Fader solo cut busses.
CHANNEL IN TO METERS – Forces the designated bay or bays to meter channel
input signals.
MASTER CHANNEL INPUT FLIP – Flips channel inputs in the designated bay or
bays, provided the console-wide MASTER INPUT FLIP is not selected.

Blank Panel

A panel is available to mount custom options above the SL953. If this panel is
currently blank, please contact your local SSL office or distributor to discuss the
various possibilities.

The SL 955J Motion Control Panel

All the functions on this panel, situated below the computer monitor, are fully
described in the J Series Computer Operator's Manual.
5-25
21.12.94