Customising Enable Button Control; Machine Control And Disktrack - Solid State Logic SL 9000 J Series Operator's Manual

Machine Control

Customising Enable Button Control

The Serial Machine Control display provides a facility to customise the serial port-to-
enable button relationship, if required. Normally, ENABLE 1 will control the machine
on port 1, ENABLE 2 port 2, etc. By stabbing on the relevant box in the Key column,
and entering the desired enable button number, a front panel enable button can be
assigned to control more than one port. Remember that this not only means enabling
transport control but will also affect record arming.

Machine Control and DiskTrack

If your system is fitted with DiskTrack, and you wish to transfer material to or from a
multitrack tape machine, please read the DiskTrack Operator's Manual.
3-33
13.7.96