Solid State Logic SL 9000 J Series Operator's Manual page 376

Machines Menu
As if all the above wasn't enough to keep you happily customising your KeyPad key
functions for hours, the function list contains several other entries which we will leave
you to discover for yourself.
If any of the functions are not clear, please contact you local SSL office or distributor.
Many additional functions may be assigned to the KeyPad by means of macro
selection (see Section 8).
Note that KeyPad programming is saved as part of the system information, not with a
Project File, and cannot be overwritten by loading a new project. Custom KeyPad
settings can be saved in a named file by stabbing on Save. First select the appropriate
KeyPad from the list (or the only one if you only have one!) and hit OK. Name the file
on the resultant QWERTY pop-up. Designate a file to be loaded at boot up by naming
it Boot_database
To recall a file at any time, hit Load and select your chosen file from the resultant list.
This produces a list of KeyPads; select the one you want to load the file to.
Clear may be used to clear an entry for the currently selected key or clear the currently
selected LED display option. Revert will call up the last saved data for the currently
selected KeyPad.
7-23
16.8.96