Loading Mixes - Solid State Logic SL 9000 J Series Operator's Manual

The Mix System
The saved mix name will also be displayed in the box directly underneath the
Automation data entry in the Settings pop-up. To view a list of previously saved
mixes, stab in this box and a Mix List pop-up will appear (see opposite). To change a
mix name, hit Edit Info at the bottom of the pop-up and stab on the item you wish to
rename. The QWERTY pop-up appears for entry of the new name.
Another option available here is the choice of whether or not the QWERTY pop-up
appears when you save Automation data. Toggle the box on the bottom left of the Mix
List pop-up to switch between No Info when Saving and Ask for Info when Saving.
If you select No Info when Saving, the system either suffixes an existing name or
increments an existing numerical value.
When you are happy with your latest mix, you may wish to select the Final Mix Safe
box, above the Mix Pass list. This places the mix held in RAM into 'Protected Replay',
and the touch sense function on the Large Faders is disabled. Both faders and switch
objects are placed in Protected Replay status (see Fader Protection on Page 5-55).

Loading Mixes

Previously saved mixes can be loaded at a later date via the Settings pop-up. First of
all, make sure you have selected the correct Project File, if the mix is not stored with
the current project. If you are not familiar with this procedure, please refer to Section 2.
Now hit the PROJECT SETTINGS button, or select Settings from the
MIX-DESK/Project menu, and stab on the box beneath the Automation data entry.
This will call up the Mix List for the currently selected project (see opposite). Stab on
the mix you require and a prompt will confirm that the system is loading your mix.
Once loaded, stab outside the list to close the window, and then stab outside the
Settings pop-up to close that.
The loaded mix name will appear in the Reference Mix box (see Page 5-13) on the
MIX-DESK display, highlighted in green to show that this is the mix you will be
updating on your next pass. This name will then be used as the 'stem' name for the
automatic numbering of subsequent passes. Mix passes from the previous mix are left
in the Mix Pass list, allowing mixes to be quickly compared with one another by use of
the Revert function (see Page 5-13).
5-43
20.8.96