The Macro Function List - Solid State Logic SL 9000 J Series Operator's Manual

The Macro Function List

By now you will have realised that the list on the left of the Macro Setup display is
used to display the contents of individual macros. The list on the right displays those
functions that can be incorporated into a macro. The list is reproduced below
(intentionally not in the same order as on screen), with definitions where necessary.
An asterisk following an item indicates that a multiple choice is involved, and a
number must be specified before that item can be included in a macro, eg. Do Snap 32,
Serial Record Enable 4 etc.
Always/New Pass
Auto Enable
Auto Modes
Autofade
Autoglide
Autotakeover
+, -. =, 0-9, 00
Up, Down, Left, Right
Enter, OK, Quit
Ch $ Cue In/Out*
Ch $ EQ In/Out*
Ch $ Ins In/Out*
Ch $ FX1 In/Out*
Ch $ FX2 In/Out*
Ch $ FX3 In/Out*
Ch $ FX4 In/Out*
Ch $ FX5 In/Out*
Ch $ FX6 In/Out*
Ch $ LF Cut*
Ch $ SF Cut*
Ch $ Match*
Ch $ Play*
Group $ Cut*
Group $ Solo*
Group Match
Group Play
Channel Names
Clear Automation
Clear Group Solos
Cycle
Cycle End Time
Cycle Start Time
Delay
Discard
DiskTrack
DiskTrack Rec Enable
DiskTrack Transfer Records On the MACHINES/DiskTrack/Configure pop-up
15.8.96
In the Auto Modes pop-up
The Automation Enable box/AUTO button
Calculator functions
Front panel cursor keys
Activates that automated switch
The Channel strip Match
and Play buttons
The Group Fader Match
and Play buttons
Instigates a delay between the execution of macro functions
Mix Pass List function
The DiskTrack box in the MIX-DESK menu
Macros
8-5