Table of Contents
Advertisement
To set PTZ limits:
8. Using the PTZ controls below the preview window, move the camera to the upper tilt limit
and then, next to Up Line, click Setting.
9. Move the camera to the lower tilt limit and then, next to Down Line, click Setting.
10. Select the Enable check box to enable the tilt limit function.
After the function is enabled, click Live to go to the upper or lower tilt limit.
Configuring Time Tasks
You can set up the camera to perform specific actions only within a specified period.
To set up a time task:
1. In the Time Task area, select the Enable check box.
2. Select the time task that you want to configure from the Time Task No. list. You
can configure up to 4 time tasks.
3. Next to Time Task Action, select the action that you want the camera to perform
during the specified period. Click Preset, Tour, Auto Scan, or Pattern.
4. Set AutoHome to a value between 5 to 3600 seconds. This is the waiting period
after a time task is interrupted (by manually calling the camera), after which the
time task resumes.
5. Click Period setting. The Setup window opens.
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
19
Advertisement
Table of Contents
