Edge Erase (Erasing Edges And Margin Shadows Of The Document) - Fuji Xerox ApeosPort-V C5580 User Manual

3 Copy

Edge Erase (Erasing Edges and Margin Shadows of the Document)

When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. The Edge Erase
feature allows you to erase such shadows.
Note
1
Select [Edge Erase].
3
2
Select any option.
 Normal
The edge width to erase is set to 2 mm for the top and bottom, and left and right edges.
 All Edges
Erases the shadows of the four edges of a document, as well as the shadow in the center of
the document if it is a bound document or a booklet. You can specify values for [All Edges]
and [Center] individually.
 Individual Edges
Erases the shadows of the top, bottom, left, and right edges of a document, as well as the
shadow in the center of the document if it is a bound document or a booklet. You can specify
values for [Top], [Bottom], [Left], [Right], and [Center] individually.
 Parallel Edges
Erases the shadows of the top and bottom edges, and left and right edges of a document,
as well as the shadow in the center of the document if it is a bound document or a booklet.
You can specify values for [Top & Bottom], [Left & Right], and [Center] individually.
 Erase Value
Allows you to specify values to erase the edges of a document.
132
• For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in proportion to the
ratio you specified.
• The binding shift specified in [Booklet Creation] will not affect the edge erase amounts.
• If original is placed on the document glass and [12 Sided] is selected when using 2 Sided Copying
feature, symmetrical edge erase amounts on both sides are not applied to output even if [Individual
Edges] is specified and [Mirror Side 1] is selected as [2 Sided Original - Side 2] option. To apply
symmetrical edge erase amounts on both sides, select [22 Sided] for 2 Sided Copying operation.
• Even when the edge erase amount is set to 0 mm, full page copying cannot be made. For
information on the areas that can actually be printed, refer to "16 Appendix" > "Printable Area" in the
Administrator Guide.