Concluding Steps; Replacing The Slimline Odd; Preliminary Steps; Removing The Defective Slimline Odd - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

12.6.2.3 Concluding steps

"Installing an HDD extension box" on page 183
Ê
"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê

12.6.3 Replacing the slimline ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)

12.6.3.1 Preliminary steps

"Locating the defective server" on page 45
Ê
"Removing backup and optical disk media" on page 80
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
I
Removing the front cover is not required in order to replace the
slimline ODD or LSD module in the 2x 3.5-inch HDD extension box.
"Removing the system fan holder" on page 74
Ê
"Removing an HDD extension box" on page 190
Ê

12.6.3.2 Removing the defective slimline ODD

Ê Remove the slimline ODD from the 4x 3.5-inch HDD extension box as
described in section
TX2540 M1
"Removing the slimline ODD" on page
Upgrade and Maintenance Manual
Accessible drives and LSD
Hardware: 10 minutes
329.
331