Replacing Processor Heat Sinks; Removing The Processor Heat Sink; Applying Thermal Paste; Installing The Processor Heat Sink - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

11.5.4 Replacing processor heat sinks

11.5.4.1 Removing the processor heat sink

Ê Remove the processor heat sink as described in section
processor heat sinks" on page

11.5.4.2 Applying thermal paste

Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
I
If the processor upgrade or replacement kit contains a new processor
heat sink, a thin layer of thermal compound has already been pre-
applied to its lower surface. In this case, please proceed with section
"Installing the processor heat sink" on page

11.5.4.3 Installing the processor heat sink

Ê Install the processor heat sink as described in sections
sink and processor" on page 288

11.5.5 Concluding steps

"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
TX2540 M1
290.
292.
and
Upgrade and Maintenance Manual
291.
"Installing the heat sink" on page
Processors
"Removing
"Preparing the heat
289.
291