Configuring Lan Teaming; After Replacing / Upgrading Lan Controllers - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

I
For the Japanese market, follow the instructions provided separately.
Note on Cool-safe
I
If the Cool-safe
and has been enabled for your server, please set information within the
Chassis ID Prom Tool accordingly.
V
CAUTION!
Please note that you can only set the ATD flag. Resetting the ATD flag
using the Chassis ID Prom Tool is not possible!

5.2.18 Configuring LAN teaming

Use ServerView Operations Manager to obtain detailed information on existing
LAN teams:
Ê In ServerView Operations Manager Single System View select System Status
from the Information / Operation menu.
Ê Under Network Interfaces select LAN Teaming.
Ê The Network Interfaces (Summary) overview shows all configured LAN teams
and their components. Choose a LAN team to display further details:
– LAN Team Properties: Properties of the selected LAN team
– LAN Team Statistics: Available statistics about the selected LAN team
I
For more detailed information, refer to the "ServerView Operations
Manager - Server Management" user guide.

5.2.18.1 After replacing / upgrading LAN controllers

Please note when re-using a replaced LAN controller:
TX2540 M1
®
Advanced Thermal Design (ATD)
®
Advanced Thermal Design (ATD) option is available
The ATD option can only be ordered from the manufacturer
as a factory preset. To find out if your server is ATD-
enabled, check for the ATD logo on the identification rating
plate.
For further information on Cool-safe
Design (ATD), please refer to your server's operating
manual.
Upgrade and Maintenance Manual
Basic software procedures
®
Advanced Thermal
105