Rack Model; Installing The Rack Front Cover - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

4.5.2

Rack model

4.5.2.1

Installing the rack front cover

Figure 18: Installing the rack front cover
Ê Fit the rack front cover on the server front (1).
Ê Carefully fold close (2) until the upper locking latch engages (3).
Ê Secure the rack front cover to the chassis with two screws on either side
(see figure 7 on page
Ê Insert and slide the ID card into its slot until it locks in place (see figure
page 54).
TX2540 M1
54).
Upgrade and Maintenance Manual
Basic hardware procedures
6 on
63