Figure 227: Routing cables
Ê Connect the LSD, SATA and power cables (see section
page
393).
Ê Run the SATA cable along the drive bays and through the cable clamp on
the server floor as shown.
Ê Run the SATA cable through the cable guide.
12.5.1.6 Concluding steps
"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
TX2540 M1
Upgrade and Maintenance Manual
Accessible drives and LSD
"Cabling" on
315