Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual page 414

Appendix
Indicator
LAN speed
3
indicator
I
Note on the onboard LAN controller
The separate management LAN connector is used as a management
interface (iRMC S4) and is prepared for operation with the Remote
Management. Optionally LAN connector 1 can also be used for iRMC S4
server management.
iRMC-related status signals
ID indicator
blue flashing
blue flashing
414
Status
yellow on
green on
off
Global error
indicator
off
orange flashing
Upgrade and Maintenance Manual
Description
traffic a transfer rate of 1 Gbit/s
traffic a transfer rate of 100 Mbit/s
traffic a transfer rate of 10 Mbit/s
Description
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
An emergency flash of the iRMC
firmware is in progress.
TX2540 M1