Expansion cards and backup units
Figure 181: Disconnecting the FBU cable from the FBU
Ê Disconnect the FBU cable from the FBU.
Figure 182: Removing the FBU from the holder
Ê Pull the FBU at a slight angle out of the holder.
9.5.5.3
Concluding steps
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
Ê If applicable,
"Updating RAID controller firmware" on page 88
"Enabling SVOM boot watchdog functionality" on page 96
Ê
258
Upgrade and Maintenance Manual
TX2540 M1