Introduction; Product Introduction; Product Features; Printer Standard Features - LabelStation Pro 240 User Manual

1. Introduction

1.1 Product Introduction

This printer incorporates the MONOTYPE IMAGING
Bold Condensed smooth font. The user can also upload True Type Fonts from a PC. Also there is a
choice of five different sizes of alphanumeric bitmap font, OCR-A and OCR-B fonts.
To design label templates, please refer to your labelling software instructions. To write custom
programs, please refer to the TSPL/TSPL2 programming manual that can be found in the
accessories CD-ROM.

1.2 Product Features

1.2.1 Printer standard features

The LabelStation 240 features the following:
•
Thermal transfer printing
•
Direct thermal printing
•
Die-cast based print carriage
•
Metal cover with large clear label view window
•
Position adjustable gap sensor
•
Position adjustable black mark sensor
•
Ribbon end sensor
•
Ribbon encoder sensor
•
LED indicators
•
Real time clock
•
USB 2.0 (full speed) interface
•
Serial RS-232C (2400-115200 bps) interface
•
8 MB SDRAM memory
•
4 MB FLASH memory
•
SD FLASH memory card reader for memory expansion up to 4 GB
•
Standard industry emulations right out of the box including Eltron
support
•
Internal 8 alpha-numeric bitmap fonts
•
Fonts and bar codes can be printed in any one of the four directions (0, 90,180, 270 degree)
•
Internal Monotype Imaging
scalable font
•
Downloadable fonts from PC to printer memory
LabelStation Pro 240
True Type font engine, and one CG Triumvirate
®
true type font engine with one CG Triumvirate Bold Condensed
®
Page 6 of 67
and Zebra language
® ®