Table of Contents
Advertisement
5. Click the "Discover Device" button to list LabelStation printers on the network. The model is
shown on the left and its corresponding IP address on the right along with other information.
6. Select the appropriate printer (click on it) then click "Change IP Address" to configure the IP
address obtained by DHCP or static.
7. The default IP address is obtained by DHCP. To change the address to static click the "Static
IP" radio button then enter the IP address, subnet mask and gateway. Click "Set IP" to
enforce these settings.
8. Users can also change the printer name by changing it in this fields and clicking "Set Printer
Name".
Note: After clicking the "Set Printer Name" or "Set IP" button, the printer resets.
9. Click the "Exit" button to return to the Diagnostic Tool's main screen.
10. If necessary, the 'Factory Default' button may be used to reset the IP, subnet mask, gateway
and printer name.
11. The 'Web Setup' button may be used to review the printer's settings and update its firmware
remotely via the internet using Internet Explorer or Firefox.
LabelStation Pro 240
Page 58 of 67
Advertisement
Table of Contents
