Table of Contents
Advertisement
1. Introduction
1.1 Product Introduction
This printer provides both thermal transfer and direct thermal printing at user selectable speeds
of: 2.0, 3.0, 4.0 or 5.0 inches per second. It accepts roll feed, die-cut, and fan-fold labels for both
thermal transfer and direct thermal printing. All common bar codes formats are available. Fonts and
bar codes can be printed in 4 directions, 8 different alphanumeric bitmap fonts and a built-in true type
font capability.
1.2 Compliances
CE Class B:
EN55022: 1998+A1: 2000+A2: 2003
EN55024: 1998+A1: 2001+A2: 2003 IEC 61000-4 Series
EN61000-3-2: 2006 & EN61000-3-3: 1995+A1: 2001
FCC Part 15, Class B
UL, CUL
C-Tick:
CFR 47, Part 15/CISPR 22 3rd Edition: 1997, Class B
ANSI C63.4: 2003
Canadian ICES-003
TÜV/Safety: EN60950: 2000
CAUTIONAUTION
1. THERE ARE HAZARDOUS MOVING PARTS IN THE CUTTER MODULE. KEEP FINGERS AND
OTHER BODY PARTS CLEAR.
2. THE MAIN BOARD INCLUDES A REAL TIME CLOCK POWERED BY A LITHIUM BATTERY
TYPE CR2032. THERE IS A RISK OF EXPLOSION IF THIS BATTERY IS REPLACED BY AN
INCORRECT TYPE.
3. DISPOSE OF USED BATTERIES IN ACCORDANCE WITH THE MANUFACTURER'S SAFETY
INSTRUCTIONS.
NOTES
1. Lengthy continuous printing may cause the printer motor to overheat. The printer will stop
printing automatically for about 10~15 minutes to cool the motor. If you turn the power off
during this period any data transferred to the printer buffer will be lost.
2. The maximum printing ratio per dot line is 15% for this printer. To print the full width black
line, the maximum black line height is limited to 40 dots, which is 5mm for 203 DPI resolution
printer and 3.3mm for 300 DPI resolution printer.
4
Advertisement
Table of Contents
