On selecting the Manual option you will see the following message. These steps must be completed:
Mode
Cont. Mode
Remove Label
Intensity
Ref. Level
Cont. Mode
Scan Paper
Intensity
Ref. Level
Cont. Mode
Complete
Intensity
Ref. Level
LabelStation Pro 240
Actions
1. Remove the continuous label. Press the SELECT key to enter
the value.
X
XXX
2. Put the continuous label under the media sensor. Press the
SELECT key to enter the value.
X
XXX
3. The sensor calibration is complete. Press the SELECT key and
the LCD returns to the previous menu.
X
XXX
Page 44 of 67