Table of Contents
Advertisement
Wrinkle
appearance
Adjusting the print-head pressure (left)
Each print-head pressure adjustment knob has
five settings. Turning clockwise increases the
pressure, turning counter-clockwise decreases
the pressure.
If the wrinkle runs lower left to upper right, adjust
as follows:
1. Decrease the right side print pressure one
notch (or increase the left side pressure one
notch) and do a test print. Repeat until the
wrinkle no longer appears.
2. If the above does not remove the wrinkle then
try printing at a different speed, or lower the print
temperature (sometimes called darkness or
density).
LabelStation Pro 240
DIRECTION
OF FEED
Adjust the print head pressure adjustment knob (right)
Each print-head pressure adjustment knob has five
settings. Turning clockwise increases the pressure,
turning counter-clockwise decreases the pressure.
If the wrinkle runs lower right to upper left, adjust as
follows:
1. Decrease the left side print pressure one notch (or
increase the right side pressure one notch) and do a
test print. Repeat until the wrinkle no longer appears.
2. If the above does not remove the wrinkle then try
printing at a different speed, or lower the print
temperature (sometimes called darkness or density).
Page 65 of 67
Advertisement
Table of Contents
