LabelStation Pro 240 User Manual page 38

A-1 Automatic
When you enter the Automatic option the message below appears and the printer feeds out a
number of labels while calibrating the sensor, after which the LCD screen returns to the previous
menu. Unprinted labels may be returned to the printer to save wasting them.
Gap Mode
Automatic
A-2 Manual
If automatic sensor calibration cannot be applied to the media, please use the Manual function to
calibrate the gap sensor.
Gap Mode
Automatic
> Manual
Pre Printed
Selecting Manual displays the following message, inviting these steps to be completed.
Mode
Paper Len.
00812 dot
Gap Size
0024 dot
Gap Mode
Scan Backing
Intensity
Ref. Level
LabelStation Pro 240
2/4
Actions
1. Press the
right digit, and press the
and the "dot/ mm/ inch". Press the SELECT key to set the paper
length.
2. Press the
right digit, and press the
and the "dot/ mm/ inch". Press the SELECT key to set the gap
size.
3. Open the print head mechanism, put the label backing (liner)
under the media sensor. Press the SELECT key to set the value
into the printer.
X
XXX
DOWN key
UP
DOWN key
UP
Page 38 of 67
to move the cursor from left digit to
key
to set the value from "0" to "9"
to move the cursor from left digit to
key
to set the value from "0" to "9"