Table of Contents
Advertisement
Gap Mode
Complete
Intensity
Ref. Level
Gap Mode
Complete
Intensity
Ref. Level
A-3 Pre-Printed
This function sets the paper length and gap size before auto-calibrating the sensor sensitivity. It
calibrates the sensor more accurately when pre-printed media is in use.
Gap Mode
Manual
>
Pre Printed
Exit
Entering Pre Printed mode displays the following message, with steps which must be completed:
Mode
Paper Len.
00812 dot
LabelStation Pro 240
Label sensor location
Label backing paper (liner)
4. Position the label with liner under the media sensor. Press the
SELECT key to get the printer to read the value.
X
XXX
Label sensor location
Label with liner
5. The gap sensor calibration is complete. Press the SELECT key
the LCD screen will return to the previous menu.
X
XXX
3/4
Actions
1. Press the
right digit, and press the
and the "dot/ mm/ inch". Press the SELECT key to set the paper
length.
DOWN
key
UP
Page 39 of 67
to move the cursor from left digit to
key
to set the value from "0" to "9"
Advertisement
Table of Contents
