Table of Contents
Advertisement
3.1.1.5 Offset:
Print Setup
Direction
Print Mode
>
Offset
This option is used to fine tune the post print stop location when a peeler or cutter is in use. Press
the DOWN
key to move the cursor from left to right over the digits, and press the UP
change the value from "+" to "-" or "0" to "9". Press the SELECT key to enter the value. Press the
MENU key to cancel the setting and return to the previous menu. The default value is +000.
Note: These settings, made at the printer, will be over-written by commands from the labelling
software (label template) at print time unless the "Use current printer settings" option is used
in the labelling software.
3.1.1.6 Shift X & Shift Y:
Print Setup
Offset
Shift X
>
Shift Y
This option is used to fine tune the print position left-to-right (X axis) and top-to-bottom (Y axis).
Press the DOWN
key to move the cursor from left to right over the digits, and press the UP
to change the value from "+" to "-" or "0" to "9". Press the SELECT key to enter the value. Press the
MENU key to cancel the setting and return to the previous menu. The default value is +000.
Note: These settings, made at the printer, will be over-written by commands from the labelling
software (label template) at print time unless the "Use current printer settings" option is used
in the labelling software.
3.1.1.7 Code Page: (examples)
Print Setup
Reference X
Reference Y
>
Code Page
This option sets the code page representing the international character set. For more information
about code page, please to refer the programming manual.
Press UP
and DOWN
setting. Press the MENU key to cancel the setting and return to the previous menu.
Note: These settings, made at the printer, will be over-written by commands from the labelling
software (label template) at print time unless the "Use current printer settings" option is used
in the labelling software.
LabelStation Pro 240
5/12
7/12
Code Page
10/12
> 850
852
860
keys to select the code page, and press the SELECT key to enable the
Offset
+000
Shift Y
+000
11/41
Page 28 of 67
key to
Code Page
11/41
> BRI
GER
FRE
key
Advertisement
Table of Contents
