Calibration - LabelStation Pro 240 User Manual

3.1.2.19 Calibration

This option is used to calibrate the sensitivity of the various optical media sensors in the printer.
Optical sensors allow the printer to track the passing of individual labels, and also detect the
absence/presence of ribbon, and these sensors occasionally need recalibrating when a new roll of
label or ribbon is fitted.
GAP MODE
AUTOMATIC AUTOMATIC
MANUAL
PRE-PRINTED
PRE-PRINTED
EXIT
A. Gap Mode
Calibration
> Gap Mode
BLine Mode
Cont. Mode
key
Press the UP
key to enter the calibration mode. Press MENU key to cancel the setting and return to the previous
menu.
Note: These settings, made at the printer, will be over-written by commands from the labelling
software (label template) at print time unless the "Use current printer settings" option is used
in the labelling software.
LabelStation Pro 240
CALIBRATION
BLINE CONT> MODE
AUTOMATIC
MANUAL MANUAL
EXIT
EXIT
1/4
Gap Mode
> Automatic
Manual
Pre Printed
and DOWN key to scroll the cursor to the media type and press the SELECT
EXIT
1/4
Page 37 of 67