Table of Contents
Advertisement
3.1.2.13 Media Power Up:
Print Setup
13/17
Format Prefix
Delimiter Char
>
Media Power Up
This option is used to set the action of the media (label) when you turn on the printer. The default
setting is No Motion. Press UP
key
to enter the value. Press
Selection
Calibration
No Motion
3.1.2.14 Head Close:
Print Setup
14/17
Delimiter Char
Media Power Up
>
Head Close
This option is used to set the action of the media (label) when you close the print-head. The default
setting is No Motion. Press the UP
key
to enter the value. Press
Selection
Calibration
No Motion
3.1.2.15 Label Top:
Print Setup
15/17
Media Power Up
Head Close
>
Label Top
LabelStation Pro 240
Media Power U
Length
>
No Motion
Exit
key
and DOWN
MENU
key to cancel the setting and return to the previous menu.
Feed
Length
Media Power U
Length
>
No Motion
Exit
key
MENU
key to cancel the setting and return to the previous menu.
Feed
Length
4/5
key to select the mode and press the
Printer advances one label
Printer calibrates all sensors, feeds label and
Printer feeds label and determines its length
Printer goes directly to Ready state
4/5
and DOWN
key to select the mode and the
Printer advances one label
Printer calibrates all sensors, feeds label and
Printer feeds label and determines its length
Printer goes directly to Ready state
Label Top
+000
Page 35 of 67
Description
determines its length
Description
determines its length
SELECT
SELECT
Advertisement
Table of Contents
