Figure 1-23 Locating The Serial Number Inside The Workstation - Silicon Graphics O2+ Hardware Reference Manual

007-4486-001
• Inside the workstation, the serial number is on the connector of the PCI tray, which
is attached to the system module (Figure 1-23). (To remove the system module, see
"Removing the System Module" in Chapter 2).
Caution: The small, printed circuit board beneath the PCI tray contains a host chip
with important system information such as the serial number. Do not mix PCI trays
between workstations. To check if your workstation has its original PCI tray,
compare the serial number on the rear of the workstation with the serial number on
the PCI tray connector. The serial numbers should be the same.
Figure 1-23 Locating the Serial Number Inside the Workstation
• If your system is running, from a shell window, type:
sysinfo -vv
• From the Toolchest, select System > System Manager > About This System.
Locating Your Workstation's Serial Number
25