Silicon Graphics O2+ Hardware Reference Manual page 204

Chapter 6: Safety and Regulatory Information
184
• Do not place this product or components of this product on an unstable cart, stand,
or table. The product may fall, causing serious damage to the product.
• Slots and openings of the workstation are provided for ventilation. To ensure
reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. This product should never be placed near or over a
radiator or heat register, or in a built-in installation unless proper ventilation is
provided.
• This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
• Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
• Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
• Do not attempt to service this product yourself except as noted in this guide.
Opening or removing covers of node and switch internal components may expose
you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
• Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the
product to normal condition.
• If the product has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for
service.
• Replace the lithium battery on the motherboard only with the same type or an
equivalent type recommended by the manufacturer. Discard used batteries
007-4486-001