Programming The Sv8100 Manually - NEC Univerge SV8100 Installation Manual

Programming the SV8100 Manually

To program the SV8100 manually, firstly connect to PC Pro and download the configuration from the
PBX. Select the 'Advanced' programming level then choose Wizards / Additional Devices / SMDR /
Setup / SMDR Port Setting. Enter a unique TCP Port for the SMDR output, usually TCP Port 4001
can be used. After entering the port number, click Apply to save the changes.
Advanced
programming
level
Wizards
In Wizards / Additional Devices / SMDR / Setup, select SMDR Service Options. Configure SMDR
Port 1 as follows, click apply to save the changes.
Output Port = LAN
Header Language = English
Omit Digits / Minimum Digits / Minimum Duration / Minimum Ring Duration = 0
SMDR Format = General Overseas
Note, as there is only one TCP connection available for SMDR, only SMDR Port one can be used.