Configuration Import - NEC Univerge SV8100 Installation Manual

Configuration Import

The configuration import tool is used to take data and settings from the SV8100 and import it into
MyCalls. Information such as extensions, DDI's and trunks can quickly be imported into MyCalls
reducing the installation time of MyCalls.
From the Start / Programs / NEC Infrontia / MyCalls menu, run the Configuration Import Tool. Now
load PC Pro and take a download of the SV8100 configuration. In Wizards, select Applications /
MyCalls and choose a device type i.e. DDI's. Highlight the DDI's that you wish to import into MyCalls,
then right click on the highlighted area and click Copy Selection. Alternatively, you could highlight the
area and press Ctrl + C. Make sure you copy all of the columns that are available for the data that
you are importing. For example there are 3 columns to select for DDI's.