NEC Univerge SV8100 Installation Manual page 28

Set Report Specific Options
You can now complete the wizard as appropriate, depending on which report you are customising
depends on which screens you will see next. If you are customising a list type report then you will see
the following screen:
In here you can choose how the information is displayed within the reports. The drop down menu
'Group Items on Report By' allows you select if the calls are grouped on the report. For example if
you group by extension the report would first show you all calls for extension 200, 201, 202 etc. If you
grouped by DDI, then the calls would be shown for each DDI in turn. The 'Number of Items on
Report' can be modified to display to display a fixed number of calls. To list all calls, select 'Display
all matching items.' You may also configure the 'Order Report Output By.' If for example you
grouped the report by extension, you can display the calls within the extension by the; Time of Call,
Call Cost, Handling Cost, Duration or Ring Time.
At this point you can click finish and the report will run. By clicking next you can configure optional
report filtering. Report filtering allows you to narrow the information displayed in the reports. For
example you may only wish to include a specific extension or DDI. Click next to start filtering.