12. Press escape twice to return to the main menu
13. Select option 7 to logoff
14. From the logoff menu select option 2 to save changed config and press enter.
15. You will return to the enter password prompt.
16. At the enter password prompt type d0 then press enter.
17. Type q and press enter to close the VPS.exe application down and then open VPS.exe again.
18. You will return to the following screen where you will see the CSID that you have set.
19. Type q and press enter to close the VPS.exe application down
20. From the Start / Programs / Retell / Sense / Services / Start Service.
21. This procedure can be repeated for each unit that needs an ID setting.
22. Make sure you only have the unit plugged in that you are setting the ID for.