Mycalls Configuration - NEC Univerge SV8100 Installation Manual

MyCalls Configuration

Before you can configure MyCalls to use call recording, you must obtain a valid call recording license.
Please refer to the documentation located in the box with the call recording unit for further information.
Now run the MyCalls application, if you have any users configured you must login to the application
as a PBX administrator. From the menu, click Configure / Telephone system, select the PBX you are
configuring recording, select Call Recording and click Edit Call Recorder Configuration. From the call
recorder drop down menu, select 'Retell' and click edit.
At the voice recorder configuration screen, enter the name of the PC that you are on. Please note it is
strongly recommended to use the PC name and not the IP address.