Table of Contents
Advertisement
Restoring factory defaults (E320/E322)
Sometimes resetting the printer to the original factory default
settings solves formatting problems.
1. Enter the special function menu. See
function menu (E320/E322) " on page 2-105
information.
2. Press and release the operator panel button twice quickly until
the Toner Low light comes on and the two bottom lights blink.
3. Press the operator panel button with a long button press (hold
until all the lights come on) to reset the printer to the original
factory defaults.
Once the settings are returned to the factory default values, the
printer returns to the Ready state.
Restoring factory defaults (E220/E321/E323)
1. Enter the configuration mode. See
function menu (E220/E321/E323) " on page 2-106
information.
2. After the four top lights are on, press and release Cancel.
3. Press and hold Continue until lights flash. The factory defaults
are reset.
4. To return the printer online, POR the printer.
"Using the special
for more
"Using the special
Diagnostic information
4500
for more
2-101
Advertisement
Table of Contents
