Download Emuls; Safe Mode; Factory Defaults; Energy Conserve - Lexmark MS517dn Service Manual

Available options:
•
Deactivate
•
Activate

Download Emuls

This appears only if at least one download emulator (DLE) is installed. The default setting is Disable. All download
emulators (DLEs) are reenabled automatically after two PORs.

Safe Mode

The settings for this menu item are On and Off (default). When enabled, Safe Mode lets the printer operate in
a special limited mode in which it attempts to continue offering as much functionality as possible despite known
issues.
Available options:
•
On
•
Off

Factory Defaults

Warning—Potential Damage: This operation cannot be undone.
This setting enables a user to restore all of the printer settings to either the network settings (on network models
only) or to the base printer settings.
To restore Factory Default settings:
1
From the Configuration Menu, navigate to Factory Defaults.
2
Select from the available options:
•
Restore Base—restores all non‑critical base printer NVRAM settings.
•
Restore STD Net—restores all network NVRAM settings.
•
Restore LES (available on the touch screen models only)—restores the factory default values for all
framework, standard applications and eSF configuration by removing all non‑standard applications; and
clears the SE logs.
After this setting is changed, the device automatically performs a POR, and restores the appropriate settings
to their factory default values.

Energy Conserve

This setting controls which values appear on the Power Saver menu.
To change the setting:
1
From the Configuration menu, navigate to Energy Conserve.
2
Select On or Off.
If On (default), then the Sleep Mode cannot be turned off. If Off, then Disabled appears on the Sleep Mode
menu, and it can be turned off.
Service menus
192
4514-6xx