Security Audit Log Menu; Set Date And Time Menu - Lexmark C790 Series User Manual

Menu item
Scheduled Method
Single pass
Multiple pass

Security Audit Log menu

Menu item
Export Log
Delete Log
Yes
No
Configure Log
Enable Audit
No
Yes
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7

Set Date and Time menu

Menu item
Current Date and Time
Manually Set Date and Time
[input date/time]
Description
Both manual and scheduled wiping allow the file system to reuse marked disk space
without having to wipe it first.
Notes:
•
"Single pass" is the factory default setting.
•
Highly confidential information should be wiped using only the Multiple Pass
method .
•
Scheduled wipes are initiated without displaying a user warning or
confirmation message.
Description
Enables an authorized user to export the audit log
Notes:
•
To export the audit log from the printer control panel, a flash drive must be
attached to the printer.
•
From the Embedded Web Server, the audit log can be downloaded to a
computer.
Specifies whether audit logs are deleted
Note: "Yes" is the factory default setting.
Specifies whether and how audit logs are created
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
•
Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
•
Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
•
With the security audit log activated, the severity value of each event is
recorded. 4 is the factory default setting.
Description
Shows the current date and time settings for the printer
Notes:
•
Date and Time is set in YYYY-MM-DD HH:MM format.
•
Manually setting the date and time sets Enable NTP to Off.
Understanding printer menus
119