Removing the front wheel
2
20
When removing, avoid damage
to brake pipes, brake disks,
brake pads or the wheel rim
(mask off with tape if necessary).
Keep dirt and moisture away
from the wheel bearings.
Do not damage the ABS sensor
cable, ABS sensor ring or ABS
sensor.
1
2
3
• Place the motorcycle on its
Apply a load over the rear
wheel so that the motorcycle
cannot tip forward.
• Remove the 4 securing
• Take off the front wheel
1
main (center) stand on a flat,
firm surface
screws 1 and 2
mudguard 3