Weekly Maintenance - MUTOH Rockhopper 3 Extreme Operation Instructions Manual

4.1.1 Weekly Maintenance

4.1.1.1 Clean the edges of the caps and the area around the caps
Power ON the printer and go to the "WiperClean-Menu", DON'T press enter when in it.
Step 1 :
This will cause the unlocking of the carriage.
Clean the edges of the caps with the cleaning swab, if necessary use some Eco solvent cleaning
Step 2 :
liquid.
Clean the area around the caps with a polyknit wiper.
Step 3 :
Press the [ENTER] key in the active display (=WiperClean menu)
Step 4 :
The head will cap in and be locked.
Operation Instructions Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
36 AP-77150 – Rev. 1.1 – 05/04/07