Ford 1997 Aerostar Workshop Manual page 67

1997 Aerostar/Ranger
Item Part Number
1 9430
2 N804468-S
3 N804465-S2
4 —
5 N805702-S2
6 9430
7 —
A —
Installation
1. Clean mating surfaces of exhaust manifolds and cylinder heads (6049) of carbon deposits.
2. Position right or left exhaust manifold and exhaust manifold gasket in place to cylinder head and
hand-tighten retaining bolts and studs. Tighten to 20-30 Nm (15-22 lb-ft).
3. Rotate or install oil level indicator tube (6754) to appropriate exhaust stud and install retaining nut if
exhaust manifold was removed. Tighten to 16-20 Nm (12-15 lb-ft). Apply ESE-M4G217-A sealer to
tube prior to installation if tube was removed.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B24.HTM~gen~ref.HTM
Description
Exhaust Manifold, Right
Stud
Screw and Washer
Bolt
Hex Flange Stud, M8 x
1.25 x 90
Exhaust Manifold, Left
Screw and Washer
Tighten to 20-30 Nm
(15-22 Lb-Ft)
tomsn048@gmail.com
Page 2 of 3
2011-04-27