Ford 1997 Aerostar Workshop Manual page 61

1997 Aerostar/Ranger
Install push rod, rocker arm, rocker arm seat (6A528), and rocker arm bolt for valves:
Cylinder No. 1 Exhaust
Cylinder No. 2 Intake
Cylinder No. 3 Exhaust
Cylinder No. 3 Intake
Cylinder No. 4 Exhaust
Cylinder No. 5 Intake
Cylinder No. 6 Exhaust
Cylinder No. 6 Intake
Tighten rocker arm bolts to 11 Nm (8lb-ft).
24. For valves in above step, check rocker arm-to-valve clearance. Clearance should be 2.15-4.69mm
(0.084-0.184 in.).
Camshaft Position B — Rocker Arm, Push Rod, and Fulcrum Installation
Part
Item Number
1 —
2 —
3 —
4 6564
5 6564
6 6564
7 6564
8 6564
9 6564
10 6564
11 6564
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B23.HTM~gen~ref.HTM
Description
Centerline
Camshaft Sprocket Timing Mark at Two o'Clock
Position
Crankshaft Sprocket Timing Mark at 4:30 Position
Rocker Arm (No. 1 Exhaust Rocker Arm and Parts)
Rocker Arm (No. 2 Intake Rocker Arm and Parts)
Rocker Arm (No. 3 Exhaust Rocker Arm and Parts)
Rocker Arm (No. 3 Intake Rocker Arm and Parts)
Rocker Arm (No. 6 Exhaust Rocker Arm and Parts)
Rocker Arm (No. 6 Intake Rocker Arm and Parts)
Rocker Arm (No. 5 Intake Rocker Arm and Parts)
Rocker Arm (No. 4 Exhaust Rocker Arm and Parts)
tomsn048@gmail.com
Page 6 of 10
2011-04-27