1997 Aerostar/Ranger
Item Part Number
1
—
2
7A247
3
7A187
4
7E395
5
—
6
7B229
27. Insert speedometer gear and cable into transmission. Insert bolt through clamp and tighten to 2.25-
2.82 Nm (20-25 lb-in).
28. Install a jack under the lower control arm. Slowly raise lower control arm until front coil spring is under
tension. Continue to raise lower control arm until steering knuckle can be connected to the upper ball
joint. Install pinch bolt and nut and tighten to 37-50 Nm (27-37 lb-ft).
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B39.HTM~gen~ref.HTM
Description
Converter Clutch Solenoid Connect Wires
Park/Neutral Position Switch
Kickdown Control Shaft Rod
Shift Cable and Bracket
Converter Clutch Solenoid and 3-4 Shift Solenoid
Transmission Shift Cable Bracket
tomsn048@gmail.com
Page 12 of 18
2011-04-27