Ford 1997 Aerostar Workshop Manual page 125

1997 Aerostar/Ranger
Item Number
1 N801731-S2 U-Nut
2 N804639-S2 U-Nut
3 N606692-S2 Screw and Washer Assembly
4 N606677-S2 Screw and Washer Assembly
5 8260
6 8592
7 8501
8 8286
9 8146
10 8005
11 17B613
12 8075
A —
50. Connect hose to evaporative emission canister purge valve (EVAP canister purge valve) (9C915).
51. Reconnect A/C suction hose to accumulator and discharge line to condenser. Evacuate and refill with
refrigerant as outlined in
52. Route belt as illustrated but do not wrap over alternator pulley. With wrench, rotate engine drive belt
tensioner clockwise and slide belt over alternator pulley.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B39.HTM~gen~ref.HTM
Description
Upper Radiator Hose Install with Stripe at 12:00
O'Clock Position
Water Hose Connection
Water Pump
Lower Radiator Hose Install with Stripe at 12:00
O'Clock Position
Fan Shroud
Radiator
Reservoir
Radiator Overflow Hose
Tighten to 6-8 Nm
(53-71 Lb-In)
Section 12-00 .
tomsn048@gmail.com
Page 16 of 18
2011-04-27