1997 Aerostar/Ranger
37.
CAUTION: The support hook or chain must angle rearward to the rear attaching point.
Damage will result if chain runs across throttle cable or throttle valve mechanism.
NOTE: When only two support points are used, the engine assembly will hang slightly down at
the rear with the transmission attached. With the transmission removed, the engine assembly
will hang slightly down at the front because of the weight of the accessories.
To eliminate tilt:
a. For forward tilt, attach a chain from the left (front) support bar to the stud on the No. 4 exhaust
runner.
b. For rearward tilt, attach a chain from the right (rear) support bar to the exhaust manifold
between the No. 2 and No. 3 exhaust runner.
Installation
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B39.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 7 of 18
2011-04-27