Ford 1997 Aerostar Workshop Manual page 13

1997 Aerostar/Ranger
Item Part Number
1 12A648
2 124648
3 9424
4 806344
5 18599
6 10884
A —
9. Disconnect upper radiator hose from thermostat housing connection. After loosening hose clamp, use
a twisting motion on hose to loosen from housing.
10. Remove ignition coil and bracket assembly (two nuts) from top of throttle body and pencil brace at
exhaust manifold.
11. Remove throttle body as outlined in
12. Disconnect fuel charging wiring retaining standoffs from inboard rocker arm cover studs. Carefully
disconnect electrical connections to each fuel injector and remove harness from engine.
13. Disconnect heater water hoses.
14. Remove spark plug wire set (12281) from spark plugs (12405) by using a twisting motion on the
rubber boot. Remove harness retaining standoffs from rocker arm cover studs.
15. Remove valve covers as outlined in this section.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B17.HTM~gen~ref.HTM
Description
Engine Coolant Temperature Sensor(Ranger)
Engine Coolant Temperature Sensor (Aerostar)
Intake Manifold
Heater Elbow
Hot Water Heater Elbow Connection
Water Temperature Indicator Sender Unit
Tighten to 16-24 Nm
(12-17 Lb-Ft)
Section 03-04B
tomsn048@gmail.com
.
Page 2 of 9
2011-04-27