Ford 1997 Aerostar Workshop Manual page 123

1997 Aerostar/Ranger
34. Position 2 dash panel ground straps on engine and tighten 2 ground strap bolts.
35. Lower vehicle.
36. Connect oil pressure sensor electrical connector through cab area.
37. Install rear engine compartment cover inside vehicle.
38. From inside engine compartment, in front of vehicle connect 2 electrical connectors to generator.
39. Connect vacuum supply hose to power brake booster.
40. Reconnect cruise control vacuum at check valve and linkage to throttle shaft.
41. Connect barometric manifold absolute pressure sensor vacuum line located on dash panel.
42. Connect steering column at intermediate shaft. Install pinch bolt and tighten to 41-57 Nm (30-42 lb-ft).
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B39.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 14 of 18
2011-04-27