1997 Aerostar/Ranger
39. Install spark plugs. Tighten to 27 Nm (20 lb-ft).
40. Clean valve cover and cylinder head sealing surfaces with solvent to remove all gasket material and
dirt.
41. Apply Silicone Rubber D6AZ-19562-AA or equivalent meeting Ford specification ESB-M4G92-A or
ESE-M4G195-A to intersection of cylinder head and intake manifold.
42. Install valve cover gasket and secure with retaining features.
43. Install valve cover. Install screw and washer assemblies and stud assemblies. Tighten to 10-14 Nm
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B43.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 19 of 23
2011-04-27