Ford 1997 Aerostar Workshop Manual page 139

1997 Aerostar/Ranger
A —
B —
43. Install and align the hood. Tighten to 9 Nm (80 lb-in). Connect the hood light connector and locator
pin to the hood. Clip the ground strap to the hood on the right hand side.
44. Install the negative battery cable.
45. Fill the cooling system.
46. Fill the engine with oil.
47. Fill the power steering system.
48. Evacuate, pressurize, leak test, and recharge the A/C system.
49. Check the operation of the engine.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B40.HTM~gen~ref.HTM
Tighten to 2-3 Nm
(18-27 Lb-In)
Tighten to 1-2 Nm
(9-18 Lb-In)
tomsn048@gmail.com
Page 12 of 12
2011-04-27