Ford 1997 Aerostar Workshop Manual page 60

1997 Aerostar/Ranger
Cylinder No. 1 Intake
Cylinder No. 2 Exhaust
Cylinder No. 4 Intake
Cylinder No. 5 Exhaust
Tighten rocker arm bolts to 11 Nm (8 lb-ft).
21. For valves in above step, check rocker arm-to-valve clearance. Clearance should be 2.15-4.69mm
(0.084-0.184 in.).
Camshaft Position A — Rocker Arm, Push Rod, and Fulcrum Installation
Item Part Number
1 —
2 —
3 —
4 6564
5 6565
6 6A528
7 6A527
8 6564
9 6564
10 6564
A —
22. Rotate engine so camshaft is in Position B, as shown, with camshaft sprocket timing mark at two
o'clock position and crankshaft sprocket timing mark at 4:30 position.
23. NOTE: Lubricate each push rod, rocker arm, and rocker arm fulcrum with Engine Assembly
Lubricant D9AZ-19579-D or equivalent meeting Ford specification ESR-M99C80-A before
installing.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B23.HTM~gen~ref.HTM
Description
Centerline of Keyway Vertical Within Five Degrees
Camshaft Sprocket Timing Mark at Top Center
Crankshaft Sprocket Timing Mark at Top Center
Rocker Arm, No. 1 Intake
Push Rod
Rocker Arm Fulcrum
Rocker Arm Bolt
Rocker Arm and Parts
Rocker Arm and Parts
Rocker Arm and Parts
Tighten to 11 Nm
(8 Lb-Ft)
tomsn048@gmail.com
Page 5 of 10
2011-04-27