Module Programming - Fire-Lite MS-9200UDLS Manual

Master Programming Level

Module Programming

Pressing 2, while viewing Point Program Screen #2, will allow the programmer to add, delete or
POINT PROGRAM
SELECT TYPE
change the programming of an addressable module. The following screen will be displayed by the
1=DETECTOR
2=MODULE
control panel:
Point Program Screen #2

Pressing 1 while viewing the Modules Screen will display the following screen which allows the
programmer to add a new module address to programming:
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in
the three digit module address, such as 005.
When the last digit is keyed-in, the following screen will be displayed:
Pressing 1 for Control Module or 2 for Monitor Module will cause the following screen to be
displayed:
The programmer can continue adding modules by pressing the ESC or left arrow key which will
return the display to the Add Module Screen #1.

Pressing 2 in the Modules Screen will display the Delete Module Screen which allows the
MODULES
programmer to delete a specific module:
1=ADD
2=DELETE
3=EDIT
Modules Screen
A flashing cursor will appear in the position of the first asterisk to the left. Using the panel keypad,
key in the module address such as 005. When the last digit is keyed in, the following confirmation
that the module has been deleted will be displayed:
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Add Module
Delete Module
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
ADD MODULE
ENTER MODULE#

Add Module Screen #1
ADD MODULE
1=CONTROL
2=MONITOR
Add Module Screen #2
ADD MODULE
MODULE# 005
IS ADDED
Add Module Screen #3
DELETE MODULE
ENTER MODULE#

Delete Module Screen
DELETE MODULE
MODULE# 005
IS DELETED
Programming
75