13: Service Terminal; 14: Printer/Pc; 15: Print - Fire-Lite MS-9200UDLS Manual

Operating Instructions
•
•
4.23.13 Service Terminal
READ STATUS
Pressing 1 while viewing Read Status Screen #5 will display the following screens:
1=SERVICE TERMINAL
2=PRINTER/PC
3=PRINT
Read Status Screen #5
The Ring Count is displayed in the Service Terminal Screen.
4.23.14 Printer/PC
Pressing 2 while viewing Read Status Screen #5 will display the following screen:
The display will inform the operator as to whether the control panel is configured for a printer or a
PC. In the example above, PR4800 indicates that the panel is configured for a printer with a baud
rate of 4,800.
4.23.15 Print
READ STATUS
To print program data or control panel status, press 3 while viewing Read Status Screen #5. The
1=FUTURE USE
2=PRINTER/PC
following screens will be displayed:
3=PRINT
Read Status Screen #5
Pressing 1 while viewing Print Screen #1 allows the user to print the History file which will detail
all of the system activities since the file was last cleared from memory.
Pressing 2 while viewing Print Screen #1 allows the user to print the Walktest log which will detail
all of the system activations during walktest since the log was last cleared. Refer to "Walktest" on
page 103 for additional information on the display.
Pressing 3 while viewing Print Screen #1 allows the user to print the detector data for each
addressable smoke detector connected to the system. A printout, similar to the following example,
will be generated if an optional printer is connected to the FACP.
150
Communication Format
Event Codes
PRINT
1=HISTORY
2=WALKTEST LOG
3=DETECTOR DATA
Print Screen #1
SERVICE TERMINAL
RING COUNT
Service Terminal Screen
PRINTER PC
PRINTER PC PR4800
Printer/PC Screen
1=EXIT PRINTING
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Read Status
PRINT
Print Screen #2