Fire-Lite MS-9200UDLS Manual page 115

Master Programming Level
The LED assignments for the modules annunciating Point Ranges 21 - 30, 31 - 40 and 41 - 50, 51 -
60, 61 - 70, 71 - 80, 81 - 90 and 91 - 99, will follow the same pattern as the second ANN-LED
Module.
ANN-RLY Options
PRIMARY ANN-BUS
1=ENABLED YES
2=MODULES INSTALLED
Pressing 2 for Module Options while viewing the ANN-BUS Address Screen when the ANN-RLY
3=AUTO-CONFIGURE
option is selected, will cause the following screen to be displayed:
ANN-BUS Screen #2
The ANN-RLY module provides ten Form-C relays which can be programmed for various
functions. The initial screen displays Relays 1 through 3. Pressing the down arrow key will
display the remaining relays for this module.
To program any of the ANN-RLY relays, while viewing the appropriate ANN-RLY Option screen,
press the number key corresponding to the relay to be programmed. Following is a list of the
available programming options for each relay:
•
•
•
•
•
•
•
•
•
•
•
•
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Not Used Not Used
Not Used Not Used
Point 11 Point 12
Active/Alarm Active/Alarm
Point 11 Point 12
Trouble Trouble
Point 11 Point 12
Supervisory Supervisory
Point 16 Point 17
Active/Alarm Active/Alarm
Point 16 Point 17
Trouble Trouble
Point 16 Point 17
Supervisory Supervisory
Table 3.9 ANN-LED Module #2 (Point Range 11 - 20)
Alarm
Supervisory
Supervisory AR
Trouble
Comm Fail
Process Mon
Process Mon AR
AC Loss
Hazard
Medical
Silenceable Alarm
Zone Active XX
Not Used
Not Used
Point 13
Active/Alarm
Point 13
Trouble
Point 13
Supervisory
Point 18
Active/Alarm
Point 18
Trouble
Point 18
Supervisory
ANN-RLY - ADDR. X-1
1=RLY 1 ZONE 00
2=RLY 2 ZONE 01
3=RLY 3 ZONE 02
ANN-RLY Options Screen
Programming
Not Used Not Used
Not Used Not Used
Point 14 Point 15
Active/Alarm Active/Alarm
Point 14 Point 15
Trouble Trouble
Point 14 Point 15
Supervisory Supervisory
Point 19 Point 20
Active/Alarm Active/Alarm
Point 19 Point 20
Trouble Trouble
Point 19 Point 20
Supervisory Supervisory
115