Table of Contents
Advertisement
POINT PROGRAM
SELECT TYPE
1=DETECTOR
2=MODULE
Point Program Screen #2
MS-9050UD Series PN 52413:D 12/15/08
As an example, the user could quickly enter 'FLR_3_ROOM_305' as follows:
1. The cursor is on the first letter of the Adjective field. Press the zero key twice to display
FLR_3
2. With the cursor on the first letter of the Noun field, press the zero key twice to recall the
display ROOM_304. The cursor automatically jumps from the first to the last letter of the
Noun field
3. With the cursor on the last letter of the Noun field, press the zero key again to increment the
room number to 305
4. Press the Enter key to store the information
3.6.2.2 Module Programming
Pressing 2, while viewing Point Program Screen #2, will allow the programmer to add, delete or
change the programming of an addressable module. The following screen will be displayed by
the control panel:
1=ADD
2=DELETE
3=EDIT
3.6.2.2.1 Add Module
Pressing 1 while viewing the Modules Screen will display the following screen which allows
the programmer to add a new module address to programming:
ENTER MODULE#
***
A flashing cursor will appear in the position of the first asterisk to the left. The programmer
keys in the three digit module address, such as 006.
When the last digit is keyed-in, the following screen will be displayed:
1=CONTROL
2=MONITOR
MODULES
Modules Screen
ADD MODULE
Add Module Screen #1
ADD MODULE
Add Module Screen #2
Programming
67
Advertisement
Table of Contents
